12in X 20in Silver (Mirror) Metallic Heat Transfer Vinyl

$4.25

Clear
SKU: N/A Category:

Description

Metallic Heat Transfer Vinyl 12in X 20in Sheet

Details:
• Applies at low temperatures
• Peels COLD
• Adheres to 100% Cotton or uncoated nylon and poly/cotton blends
• Available in Gold or Silver

Add a metallic mirror effect to garments or logos with EasyWeed Metallic by Siser! The CAD material is available in Gold or Silver, applies at low temperatures, Peels COLD, and adheres to 100% cotton, 100% Uncoated Polyester, or cotton/poly blends. EasyWeed Metallic wrinkles and cracks after washing, creating a vintage look that’s perfect for today’s retro fashion trends. Machine washable inside out with cold water and mild detergent Siser Metallic gives the shiny look of a colored chrome. Perfect for any design that needs to stand out in a crowd!

Please note that Metallic is a unique product and that cracking and delamination may occur after washing. The results are not predictable.

DISCLAIMER: *Metallic is a unique product – cracking and delamination may occur after washing. Results are not predictable.

 

Additional information

Weight 1 oz

Cutter Settings

Cricut:

Blade: Standard
Setting: Light Cardstock

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer,
Smooth
Speed: 8
Force: 14

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3

Roland GS/GX-24:

Blade: 45°
Gram Force: 180g-190
Speed: 25-50 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application instructions

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
  and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds
Metallic Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before first wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…